| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
 DIP/入力 | 低 | 認証済み | 再発 | 2026-08-27 05:08 | 2026-08-29 06:20 |
| テスター | Marcher | 担当者 | ソース | apple/mac128.cpp | |
| バージョン | 0.288 | 発生バージョン | 修正バージョン | 0.290GIT | |
| 修正コミット | プルリク | ||||
| フラグ | |||||
| セット | mac128k, mac512k | ||||
| セット詳細 |
 mac128k - Macintosh 128k mac512k - Macintosh 512k | ||||
| 概 要 | フロッピー動作中にマウスを動かすとカーソルの反応が無くなる。 | ||||
| 詳 細 | If the mouse is actively moved while the floppy drive is busy (most commonly right at boot), the cursor permanently stops responding to further movement on whichever axis was being moved at that moment: - Moving the mouse along the X axis only, during disk activity, causes the X axis specifically to freeze. - Moving the mouse along the Y axis only causes the Y axis specifically to freeze. - Moving the mouse along both simultaneously causes both axes to freeze (the cursor becomes completely unresponsive). - Whichever axis/axes were NOT being moved during the vulnerable window continue to work normally. Closing and fully relaunching the MAME process always starts with a clean, working mouse. | ||||
| 再現手順 | 1. Start mac128k (or mac512k), boot from sys11. 2. While the floppy drive is actively reading during boot (before the desktop finishes loading), continuously move the mouse back and forth along the X axis only for a few seconds. 3. After the boot finishes, attempt to move the cursor left/right and up/down | ||||
| 追加情報 | |||||
| 添付ファイル |  2026-08-28 18-45-10.mp4 (2026-08-29 01:04) | ||||