| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
| 中 | 新規 | 未処理 | 昨日 10:51 | 昨日 10:51 | |
| テスター | Robbbert | 担当者 | ソース | ampro/lb186.cpp | |
| バージョン | 0.288 | 発生バージョン | 修正バージョン | ||
| 修正コミット | プルリク | ||||
| フラグ | 再発 | ||||
| セット | lb186 | ||||
| セット詳細 | |||||
| 概 要 | Unable to boot a floppy disk | ||||
| 詳 細 | This system is marked as working. According to the manual, the system waits for a boot disk and will then boot without requiring further intervention. There's no software list, so I tried my only LB186 disk and it didn't boot. The system is also supposed to be able to use standard IBMPC boot disks, so I tried a number of them, without luck. | ||||
| 再現手順 | >mame lb186 -flop1 e:\data\pc\ok\freedos360k_1_20061014.img Cursor flashes faster but nothing else happens. In the debugger, nothing is loaded into memory, and code execution stays in the BIOS. Tried a bunch of pc disks, MAME rejected most of them, however 360k ones were accepted, but none did anything. | ||||
| 追加情報 | Tested in 0.277, the system works there, able to boot one disk "freedos360k_1_20061014.img". Seems quite picky; other disks that work in pc's get the "Non-system disk or disk error" response instead. In 0.288, there's no messages, doesn't seem to read the disk at all. | ||||
| 添付ファイル | |||||