| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
 その他 | 低 | 認証済み | 未処理 | 2025-07-16 23:20 | 2025-07-17 22:32 |
| テスター | JimCarlTay | 担当者 | ソース | igs/pgm.cpp | |
| バージョン | 0.278 | 発生バージョン | 修正バージョン | ||
| 修正コミット | プルリク | ||||
| フラグ | |||||
| セット | py2k2 | ||||
| セット詳細 |
 py2k2 - リアルアンドフェイク フォトY2K 2 / 超級比一比2 / 大家来找碴2 / Photo Y2K 2 | ||||
| 概 要 | リージョンをWorldにするとフォトモード設定が現れない。 | ||||
| 詳 細 | On MAME, when enabling the DIP switch to access the service menu for Photo Y2K 2, the Operator Settings menu is supposed to allow you to set the "photo mode" of the game, but it does not appear, keeping the setting stuck to adult mode. There is no way currently to change it to normal mode for tamer pictures. This is due to the system assuming the region is Taiwan despite the default region setting being World. | ||||
| 再現手順 | 1. Load the game. 2. Press Tab and go to the DIP switch menu. 3. Enable Service Mode. 4. Reset the system. 5. When in the service menu, go to Operator Settings. 6. The "photo mode" setting does not appear. Additional step: Check in Machine Configuration if the region is set to World. If the issue can be replicated despite that region setting, then the incorrect behavior can be confirmed. | ||||
| 追加情報 | If the game is run in FinalBurn Neo with that exact region setting, the photo mode setting appears and can be changed. I'm not sure if the severity in this case should be minor or major, so that is completely up to whoever is reviewing this report. A workaround, as suggested by Haze, would be to wait until the game reaches attract mode so the service menu can detect the right region once Service Mode is enabled in the DIP switches. F3 must be pressed instead of selecting "Reset System" in the DIP switch menu. BIOS used: PGM BIOS V2 | ||||
| 添付ファイル |  0000.png (2025-07-16 23:20) | ||||
| py2k2-07-16-221244.png (2025-07-16 23:20) | |||||