| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
 クラッシュ/フリーズ | 重要 (ゲーム) | 仮承認 | 未処理 | 2023-09-21 11:18 | 2023-09-21 19:23 |
| テスター | Davidian1024 | 担当者 | ソース | pc/ct486.cpp | |
| バージョン | 0.258 | 発生バージョン | 修正バージョン | ||
| 修正コミット | プルリク | ||||
| フラグ | |||||
| セット | ct486 | ||||
| セット詳細 |
 ct486 - PC/AT 486 with CS4031 chipset | ||||
| 概 要 | MS-DOS 6.22のセットアップディスクを起動しようとするとフリーズする。 | ||||
| 詳 細 | When booting into the MS-DOS 6.22 disk 1, the system hangs at the moment when the setup program would normally first appear. | ||||
| 再現手順 | Boot the ct486 driver and configure a single 1.44MB floppy drive. Configure flop1 with MS-DOS 6.22 Disk 1 [rom name="disk1a.img" size="1474560" crc="69d8cfdd" sha1="30b4b2e99b26b0e5e7dbe61b9892e45fe751a3e8"] Boot the system again with this configuration and don't press any keys. Observe that the Starting MS-DOS... message appears and that floppy drive activity can be heard, but once floppy drive activity stops, the initial setup program screen never appears. The cursor only continues to blink as it had been, but nothing else on screen changes. | ||||
| 追加情報 | When booting off of the MS-DOS 6.22 Setup Disk from floppy drive A: the emulated system will hang just a moment or two after displaying the Starting MS-DOS... boot message. The boot up involves the usual startup through BIOS, including memory test and emulated floppy drive loading sounds. Pressing ctrl+alt+delete will not cause the system to reboot once the hang has occurred. It works before the hang occurs. You can tell when the hang has occurred once the floppy drive sounds have stopped. The cursor will continue to blink onscreen and the floppy can still be heard steadily whirring. This was reported previously here: https://mametesters.org/view.php?id=5547 Clearing the NVRAM makes no difference. I have the system configured with a single 1.44MB floppy as drive A: No hard drive. Beyond the F8 workaround mentioned in the previous report, I've noticed that repeatedly pressing any key starting just before the Starting MS-DOS... boot message appears seems to prevent the hang. The system manages to load the setup program if you do this. | ||||
| 添付ファイル | |||||