カテゴリ 重要度 ステータス 解決状況 登録日時 最終更新
DIP/入力仮承認未処理2016-10-16 03:392018-11-16 06:34
 
テスターYonah担当者 ソースsega/segas32.cpp
バージョン0.178発生バージョン修正バージョン
修正コミットプルリク
フラグ
セット radm, radmu
セット詳細
radm - ラッドモビール (海外版)
radmu - ラッドモビール (US版)
 
概 要Logitechゲームパッドを使うとハンドルが固まる。
詳 細The steering wheel/handle (Paddle Analog) gets stuck when using the analog sticks on a Logitech gamepad, such as the F310 or F710. This can be easily observed in the Input Test mode. If the analog stick is moved slowly, the handle reading behaves as it should.

The problem occurs when the stick is rapidly snapped to the left or right then released. In this case the handle may either get stuck mid-way to its destination before being released, not return to 80 (center) when released, or move to another position that is not center. Gently moving the stick to the left or right and slowly centering will un-stick the handle.

For example, these are the hex readings I observe:

Stick centered, untouched: 80
Quick-Left: 6e
Quick-Release: 80
Quick-Left: 0
Quick-Release: 31
Quick-Right: FF
Quick-Release: F0
Quick-Right: FF
Quick-Release: FC
再現手順 
追加情報I own both the gamepads mentioned above. The F310 is 4 years old. The F710 is only 2 months old. Both exhibit the same behavior and both work normally when tested outside MAME.
 
添付ファイル