| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
 インターフェイス | 低 | 解決済み | 修正済み | 2016-06-02 23:19 | 2019-09-08 21:54 |
| テスター | demotester | 担当者 | Robbbert | ソース | poly88/poly88.cpp |
| バージョン | 0.174 | 発生バージョン | 修正バージョン | 0.212 | |
| 修正コミット | プルリク | ||||
| フラグ | |||||
| セット | poly88 | ||||
| セット詳細 |
 poly88 - Poly-88 | ||||
| 概 要 | カセットが動作しない。 | ||||
| 詳 細 | It seems that the cassette emulation is not working ! This will be shown with an example by saving from the BASIC ! Quick infos: About Poly-88 computer - http://www.polymorphic-computers.com/poly88.html [DEAD LINK] Other emu for DOS - http://www.polymorphic-computers.com/emulator.html [DEAD LINK] Note: on the bottom of this page is "POLYTAPE.ZIP" - find the file called "BASIC.IMG" ! About the BASIC in "Basic.pdf" (@p.76, Saving and Loading a BASIC Program) - http://www.hartetechnologies.com/manuals/PolyMorphic/ | ||||
| 再現手順 | Attach the file called "BASIC.IMG" to MESS/MAME emu Snapshot ! (wait until the BASIC appears) In BASIC type an program example: >10 PRINT "POLY-88 COMPUTER" Now try to save it on tape, but 1st create a new tape called f.ex. "TEST.WAV": In BASIC type following commands: >SAVE,TEST,B (to save in "Byte" format) or >SAVE,TEST,P (to save in "Polyphase" format) Note: before pressing the RETURN-key be sure that the tape is in the Recording mode and starts to record ! According to the "Basic.pdf" on p.81, points 6. and 7. (and point 2.): @point 6. - basic will respond with message "Working...", and give the record numbers of the current tape records ! (this seems to work) @point 7. - after the tape has been recorded, BASIC will respond with a prompt ">" ! (this seems NOT working - the saving never finish) @point 2. - remember to set the "Poly / Byte" switch on the back of PolyMorphic System ! (but there is not a such switch/option in MESS !) Some example photos - http://old-computers.com/museum/photos.asp?t=1&c=563&st=1 Click on "Back panel" picture - the red switch is used to modify the tape record speed ! (this option seems missing in MESS !) So, it is currently impossible to save / load a BASIC program (and any other) to / from tape in MESS ! EDIT: cassette tape interface with the red switch (from inside) - http://www.polymorphic-computers.com/images/cassette1.jpg [DEAD LINK] (boards: http://www.polymorphic-computers.com/boards.html ) [DEAD LINK] | ||||
| 追加情報 | |||||
| 添付ファイル | |||||