| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
 システムコア | 低 | 担当者決定 | 未処理 | 2014-04-25 13:47 | 2014-04-30 20:49 |
| テスター | maclover490 | 担当者 | smf | ソース | pc/ct486.cpp |
| バージョン | 0.153 | 発生バージョン | 0.151 | 修正バージョン | |
| 修正コミット | プルリク | ||||
| フラグ | |||||
| セット | ct486 | ||||
| セット詳細 | |||||
| 概 要 | IBM OS/2 1.0をインストール時にフリーズする。 | ||||
| 詳 細 | When I attempt to install IBM OS/2 1.0, the installation will make it to the point where it copies files from the Installation floppy to the hard disk. What is supposed to happen is after the files are copied, the installer will display a message to remove the installation floppy and reboot the computer to continue installation. What happens in MESS 0.151 and later is that it will freeze up when it copies files to the hard drive. In 0.150 the install would actually complete | ||||
| 再現手順 | - Create a hard disk for installing OS/2 (I used a 20MB disk with CHS values 615/4/17) - Start MESS using the ct486 driver with "hard1" set to the CHD you created and "flop1" set to the OS/2 1.0 install floppy. - Configure the CMOS settings (For the hard disk I configured, it was a "Type 2" disk and drive A: needs to be set to 1.44MB) - Attempt to install OS/2 1.0 following the onscreen instructions. | ||||
| 追加情報 | I did a regression test with the SVN and found that this problem began with MESS SVN r25840. I checked the hard disk with DOS and it looks like the installer began copying files and creating directories but the directories were all empty. | ||||
| 添付ファイル | |||||