カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
---|---|---|---|---|---|
DIP/入力 | 低 | 解決済み | 修正済み | 2009-10-05 05:22 | 2012-12-09 22:26 |
テスター | TrevEB | 担当者 | hap | ソース | exidy/starfire.cpp |
バージョン | 0.134 | 発生バージョン | 修正バージョン | 0.147u4 | |
修正コミット | プルリク | ||||
フラグ | 実機・資料検証済み | ||||
セット | starfire, starfirea, starfir2 | ||||
セット詳細 |
starfir2 - Star Fire II
starfire - スターファイアー (set 1)
starfirea - スターファイアー (set 2)
| ||||
概 要 | スクラッチパッドRAMテストが出来ない。 | ||||
詳 細 | Scratchpad ram test is noted on page 7 & 17 of the owners manual as a complete test of the main ram done by disabling the Non-maskable Interrupt signal to the cpu. Jumper J6 at location 4G on the mainboard must be open. This would be an added option to complete emulation of the system tests. Also of note on Page 6 is the shorting of resistor R3 at location 2A of the mainboard if the daughterboard has 11 chips (starfire) versus 10 chips (starfirea) Does the driver account for this in the test? I have no idea. It behaves like it does. | ||||
再現手順 | |||||
追加情報 | |||||
添付ファイル |