カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
---|---|---|---|---|---|
低 | 解決済み | 修正済み | 2024-09-12 00:24 | 2024-09-18 19:31 | |
テスター | Robbbert | 担当者 | Robbbert | ソース | |
バージョン | 0.269 | 発生バージョン | 修正バージョン | 0.270 | |
修正コミット | 9a593dd | プルリク | |||
フラグ | |||||
セット | Any system that quickloads COM files | ||||
セット詳細 | |||||
概 要 | エラーメッセージが間違っている。 | ||||
詳 細 | If a COM or CPM file is loaded in a system that supports it, a meaningless error appears on the console, and an invalid popup momentarily appears. | ||||
再現手順 | You must choose any supporting CP/M system, such as aussieby, and use a COM file as input. The error will appear because CPM needs to have been booted before the quickload is loaded. Example: >mame aussieby -quik e:\data\cpm\aussieby\aussie-byte\fx.com (you need to substitute the system and software you have on hand) Firstly it says: :quickload: Error loading 'fx.com' : Unsupported operation (image:2) then the popup says Error loading 'fx.com' : %4$s As you can see, the first message provides no useful info to the user - they would never guess that CP/M needs to be running first. The popup is clearly missing a parameter. | ||||
追加情報 | The following systems use a similar quickload feature and should be checked for the above issue. altos5, aussieby, bigboard, dmv, kaypro & clones, mk82, mk83, mojmikro, qx10, smc777, x168, x820, x820ii. | ||||
添付ファイル |