| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
 DIP/入力 | 低 | 解決済み | 実機のバグ | 2008-02-17 22:37 | 2008-02-17 22:37 |
| テスター | -Misc Reporters- | 担当者 | ソース | capcom/cps1.cpp | |
| バージョン | N/A | 発生バージョン | 修正バージョン | ||
| 修正コミット | プルリク | ||||
| フラグ | |||||
| セット | strider | ||||
| セット詳細 |
 strider - ストライダー飛竜 / Strider (US版, B-Board 89624B-2) | ||||
| 概 要 | サービスモードで、未使用の3つ目のスタートボタンがONになっている。 | ||||
| 詳 細 | In service mode the unused 3rd start button is positioned to on. It should be off. | ||||
| 再現手順 | |||||
| 追加情報 | To test it, I did the following: 1. Pressed f2 enter service mode (it didn't go into service mode w/out resetting) 2. Pressed f3 to reset the machine (now it's in service mode) 3. Looked at the inputs screen - start 3 was set to ON like the bug description says. 4. Pressed f2 - start 3 toggles to off 5. Pressed f2 - start 3 toggles to on 6. Pressed f2 - start 3 toggles to off (and so forth) Therefore, it appears that the test mode's start 3 button (unused in the actual game) serves as the game's service mode button. When I enter service mode using the dip switch instead of f2 and look at the input screen, start 3 is set to off as it should be. Therefore the initial pressing of f2 to get into test mode is what toggled start 3 to on. I don't know how the actual machine worked, but it makes sense that this wouldn't be a bug. -jerryjanis | ||||
| 添付ファイル |  strider_notbug.png (2008-02-17 22:37) | ||||