| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
 比較テスト | 低 | 認証済み | 未処理 | 2008-02-08 22:16 | 2008-03-03 07:53 |
| テスター | dwidel | 担当者 | ソース | midway/midyunit.cpp | |
| バージョン | 0.56 | 発生バージョン | 修正バージョン | ||
| 修正コミット | プルリク | ||||
| フラグ | 実機・資料検証済み | 旧BugID | term2056ora | ||
| セット | term2 | ||||
| セット詳細 |
 term2 - ターミネーター2 (rev LA4 08/03/92) | ||||
| 概 要 | 実機との比較結果。 | ||||
| 詳 細 | Side-by-side pcb test: movie sequences: The Cyberdyne Systems sign displays correctly on the pcb. Also in the previous sequence with the 3 cut scenes the center scene (motorcycle & frieghtliner grill) is definately reversed, I couldn't notice if the other 2 were. I'm going to have to install a pause switch on my board :) missing light effects/explosion artwork: The mirror that reflects the screen to you has explosions on the back. 1 on the left and 1 on the right. When you take damage it lights up a bulb behind the mirror and you see a translucent red and white explosion over the screen. The outputs aren't in the driver to run it though. I guess I can't scan it but I might be able to backlight it and photograph it sometime (if anyone is willing to work on the driver changes). Note: If anyone is interested in adding this, please contact Dave. Contact info his on his site: http://www.widel.com/ | ||||
| 再現手順 | |||||
| 追加情報 | |||||
| 添付ファイル | |||||